Bedford Rascal
Registered in 1990.
What fails its inspection
Great Britain's MOT record for the 1990 1.0 petrol. 20 of 60 tests failed, 33%.
Better than 2% of 1990 cars. The typical one fails 21%, across 86 models with enough tests behind them to say.
| Where | Share of failures | Failed tests |
|---|---|---|
| Lights and electrics | 60% | 12 |
| Brakes | 50% | 10 |
| Exhaust and emissions | 30% | 6 |
| Body and structure | 25% | 5 |
| Suspension | 25% | 5 |
| Visibility | 25% | 5 |
The defects inspectors cite
- A lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
- The aim of a headlamp is not within limits laid down in the requirements
- Brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.
- Emissions levels exceed default limits
- The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Before you buy one
Built from what this car fails on, not from general knowledge of the model.
- Brakes — 50% of its failures
- A flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched
- Exhaust and emissions — 30% of its failures
- Emissions levels exceed default limits
- Suspension — 25% of its failures
- The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired
- Lights and electrics — 60% of its failures
- A lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
- A headlamp or light source missing, inoperative or more than ½ not functioning in the case of LED
- Body and structure — 25% of its failures
- The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired
- Visibility — 25% of its failures
- Windscreen washers not working or not providing sufficient fluid to clear the windscreen