BMW XM
Registered from 2022 to 2024.
About this model
The BMW XM is a full-size automobile manufactured by German marque BMW since 2022. It is a crossover SUV with a plug-in hybrid electric drivetrain, and is the second car developed entirely by BMW M, after the BMW M1 in 1978.
From the Wikipedia article BMW XM, licensed under CC BY-SA 4.0.
Recalls
Filed by the manufacturer with a regulator. A recall is repaired free of charge, whoever owns the car now.
A12/00996/24
The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Recall of the product from end users
A12/01261/24
The panel of the tailgate trim may not be properly bonded to the vehicle and fall off. This creates a risk of accidents and injuries for other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Recall of the product from end users
A12/02134/23
The gas generator in knee airbag modules was not properly inserted into the air cushion, resulting in the cushion failing to unfold sufficiently. As a result, it may not be able to deploy correctly in the event of an accident, leading to a reduction in the restraint effect, increasing the risk of injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Recall of the product from end users
SR/00053/25
The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Recall of the product from end users