Chevrolet Blazer V6 Auto
Registered from 1999 to 2001.

About this model
The Chevrolet (S-10) Blazer and its rebadged GMC (S-15) Jimmy counterpart are compact/mid-size SUVs manufactured and marketed by Chevrolet and GMC from the 1983 through 2005 model years, over two generations – until the early 1990s alongside these brands' full-size SUVs with near identical nameplates, but lacking removable hardtops. From the 1992 model year, GMC's full-size Jimmy had become the "Yukon", and so, the S-15 prefix was dropped on the smaller GMC Jimmy. Starting with the 1995 second generation, the large Blazer was rebranded as the Chevrolet Tahoe, and these mid-size SUVs were simply launched as the "all-new Chevrolet Blazer".
From the Wikipedia article Chevrolet S-10 Blazer, licensed under CC BY-SA 4.0.
What fails its inspection
Great Britain's MOT record for the 2000 4.3 petrol. 7 of 29 tests failed.
| Where | Share of failures | Failed tests |
|---|---|---|
| Brakes | 71% | 5 |
| Body and structure | 43% | 3 |
| Exhaust and emissions | 43% | 3 |
| Lights and electrics | 43% | 3 |
| Suspension | 29% | 2 |
| Tyres and wheels | 14% | 1 |
The defects inspectors cite
- Parking brake efficiency below minimum requirement
- A lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
- A transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc
- Parking brake lever has excessive movement indicating incorrect adjustment
- A brake lining or pad worn below 1.5mm
- A rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps
Before you buy one
Built from what this car fails on, not from general knowledge of the model.
- Brakes — 71% of its failures
- Parking brake efficiency below minimum requirement
- Parking brake lever has excessive movement indicating incorrect adjustment
- A brake lining or pad worn below 1.5mm
- Exhaust and emissions — 43% of its failures
- Suspension — 29% of its failures
- A suspension joint dust cover missing or no longer prevents the ingress of dirt etc
- A suspension pin, bush or joint excessively worn
- Tyres and wheels — 14% of its failures
- Lights and electrics — 43% of its failures
- A lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
- A rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps
- Body and structure — 43% of its failures