Mazda Motor Caravan
Registered from 2003 to 2009.
What fails its inspection
Great Britain's MOT record for the 2005 2.5 diesel. 6 of 12 tests failed.
| Where | Share of failures | Failed tests |
|---|---|---|
| Lights and electrics | 83% | 5 |
| Suspension | 50% | 3 |
| Brakes | 33% | 2 |
| Seat belts and airbags | 33% | 2 |
| Visibility | 33% | 2 |
| Body and structure | 17% | 1 |
The defects inspectors cite
- An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning
- The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired
- A brake lining or pad worn below 1.5mm
- A headlamp or light source missing, inoperative or more than ½ not functioning in the case of LED
- A lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
- A suspension joint dust cover missing or no longer prevents the ingress of dirt etc
Before you buy one
Built from what this car fails on, not from general knowledge of the model.
- Suspension — 50% of its failures
- The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired
- A suspension joint dust cover missing or no longer prevents the ingress of dirt etc
- Brakes — 33% of its failures
- A brake lining or pad worn below 1.5mm
- Lights and electrics — 83% of its failures
- An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning
- A headlamp or light source missing, inoperative or more than ½ not functioning in the case of LED
- A lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
- Seat belts and airbags — 33% of its failures
- Visibility — 33% of its failures
- Body and structure — 17% of its failures
- The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired