Peugeot 607
Registered from 2002 to 2008.
About this model
The Peugeot 607 is an executive car produced by the French manufacturer Peugeot from September 1999 to June 2010.
From the Wikipedia article Peugeot 607, licensed under CC BY-SA 4.0.
What fails its inspection
Great Britain's MOT record for the 2004 2.2 diesel. 12 of 43 tests failed.
| Where | Share of failures | Failed tests |
|---|---|---|
| Brakes | 42% | 5 |
| Lights and electrics | 42% | 5 |
| Suspension | 42% | 5 |
| Body and structure | 25% | 3 |
| Tyres and wheels | 25% | 3 |
| Steering | 17% | 2 |
The defects inspectors cite
- A direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
- The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired
- A rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps
- A steering ball joint with excessive wear or free play
- A tyre cords visible or damaged
- A door will not open using the relevant control or close properly
Before you buy one
Built from what this car fails on, not from general knowledge of the model.
- Brakes — 42% of its failures
- Suspension — 42% of its failures
- The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired
- A suspension component excessively damaged or corroded
- Tyres and wheels — 25% of its failures
- A tyre cords visible or damaged
- Steering — 17% of its failures
- A steering ball joint with excessive wear or free play
- Lights and electrics — 42% of its failures
- A direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
- A rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps
- Body and structure — 25% of its failures
- The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired
- A door will not open using the relevant control or close properly
- A suspension component excessively damaged or corroded